Customization: | Available |
---|---|
Type: | Stainless Steel Strips |
Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Stainless steel 304 and stainless steel 304L are also known as 1.4301 and 1.4307 respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel.A stainless steel strip is similar to a sheet with a thickness range between 0.2mm and 6mm. However, strip products are much narrower. Strips up to 24 inches in width are classed as narrow while anything above this are referred to as wide. |
Item |
stainless steel foil bright strip |
Material |
JIS 430/410/420/201/202/301/304/304l/309S/310S/316/316Ti/316L/321/347 ASTM 430/410/420/201/202/301/304/304l/309S/310S/316/316Ti/316L/321/347 EN 1.4372/1.4373/1.4319/1.4301/1.4306/1.4388/1.4845/1.4401/1.4571/1.4404 /1.4541/1.455/1.4016/1.4006/1.4021 |
Standard |
ASTM,AISI,JIS,EN,DIN,GB,BS |
Producing |
Hot Rolled Steel Strip, Cold Rolled Steel Strip, |
Specification |
Thickness : 0.03mm-3mm |
Length |
Coil or as demand |
Surface |
BA,2B,No.4,No.8,HL,8K,Brush,Mirror Finish |
Applications
|
Stainless Steel foil are widely used in below field: 1:Chemical industry equipment, Industrial tanks 2:Medical Instruments,Tableware, Kitchen utensil, kitchen ware 3:Architectural purpose, Milk & Food processing facilities 4:Hospital Equipment, interiorExterior decoration for building 5:Architectural purposes, escalators, kitchen ware, vehicles |
Surface Finish
|
Definition
|
Application
|
|
2B
|
Finished by heat treatment , picking or equipvalent cold rolling , followed by skin pass to obtain adequate luster surface.
|
With bright and smooth surface ,easy for further grinding to obtain brighter surface ,suitable for medical instruments ,milk
containers ,tableware and so on. |
|
BA
|
Bright heat treatment after cold rolling.
|
Structual members .etc.kitchen utensil ,cutlery ,eleltric applicances ,medical instruments ,building decorations ,etc.
|
|
NO.3/NO.4
|
Polished with No.150-240 abrasives.
|
Milky food processing equipment , medicalinstruments ,building decorations.
|
|
HL
|
Finshed by polishing with abrasives of suitable grain size to obtain continuous streaks.
|
Building decorations ,such as elevators ,escalators ,door etc.
|
|
6K/8K
|
A mirror-like reflective surface ,which is obtained by polishing with successively finer abrasives and buffing extensively with all gritlines are removed.
|
Buliding entrances,bulkding column casting ,elevator's wall doors ,counters,sculptures etc.
|
Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | ≤ 0.03 | 3.5-5.5 | 16.0-18.0 | - |
301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 6.0-8.0 | 16.0-18.0 | - |
304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 8.0-13.0 | 18.0-20.0 | - |
304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0-13.0 | 18.0-20.0 | - |
309S | ≤0.08 | ≤0.75 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0-15.0 | 22.0-24.0 | - |
310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 19.0-22.0 | 24.0-26.0 | - |
314 | ≤0.25 | ≤1.5-3.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 19.0-22.0 | 23.0-26.0 | |
316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-15.0 | 16.0-18.0 | 2.0-3.0 |
321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0-13.0 | 17.0-19.0 | - |
347 | ≤0.08 | ≤0.75 | ≤2.0 | ≤0.045 | ≤ 0.03 | 9.0-13.0 | 17.0-19.0 | |
410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | - | 11.5-13.5 | - |
420 | ≤0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.040 | ≤ 0.03 | - | 12.0-14.0 | - |
430 | ≤0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤ 0.03 | ≤0.60 | 16.0-18.0 | - |
904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 23.0-28.0 | 19.0-23.0 | - |
Q: What are the details of your after sales service?
A:1) We provide the necessary technical support to all of our customers, such as material performance and heat treatment data advice.
2) We provide the appropriate steel material technical parameters for customers in Germany, The USA, Japan, Britain, and other countries.
Q: How could I get a sample?
A: Before we received the first order, please afford the sample cost and express fee. We will return the sample cost back to you within your first order.