| Customization: | Available |
|---|---|
| Type: | Stainless Steel Sheets |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
301 stainless steel strip is a type of metastable austenitic stainless steel with a completely austenitic structure under sufficient solid solution conditions. Among stainless steel, 301 is the steel that is most prone to cold deformation strengthening. Through cold deformation processing, the strength and hardness of the steel can be improved, while retaining sufficient plasticity and toughness. In addition, this steel has good rust resistance under atmospheric conditions, but poor corrosion resistance in reducing media and poor corrosion resistance in chemical media such as acid, alkali, and salt. Therefore, it is not recommended for use in harsh corrosive environments. 301 is mainly used in the cold working state for equipment components that withstand high loads while also hoping to reduce equipment weight and prevent rusting. In addition, this steel is prone to work hardening when impacted by external forces, which can absorb more impact energy and provide more reliable safety protection for equipment and personnel.
|
Grade
|
200 Series: 201,202
300 Series: 301,304,304L,316,316L,316Ti,314 317L,321,309s,310s 400 Series: 409L,410,410s,420j1,420j2,430,444,441,436 Duplex Steel: 904L,2205,2507,2101,2520,2304 |
|
Surface Finish
|
2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect
|
|
Standard
|
JIS/SUS/GB/DIN/ASTM/AISI/EN
|
|
Technique
|
Cold Rolled; Hot Rolled
|
|
Thickness
|
0.3-4mm cold rolled; 3-16mm hot rolled; 16-100mm hot rolled; Customized according to customer requirements
|
|
Width
|
1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm
|
|
Length
|
2000mm, 2438mm, 2500mm, 3000mm, 6000mm or as required
|
|
Color
|
Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect
|
|
Application
|
Interior/Exterior decoration;Architectur; Evevator; Kitchen; Ceiling; Cabinet; Advertising nameplate; Roof structure;
Shipbuilding |
|
Lead Time
|
7-15 working days after the receipt of 30% deposit
|
|
Payment Terms
|
30% TT for deposit,70% TT /70% LC at sight balance before shipment
|
|
Price Terms
|
FOB, EXW, CIF, CFR
|
|
Packing
|
Wooden Pallet or according to customer's requirements
|
|
Surface Finish
|
Definition
|
Application
|
|
|
2B
|
Finished by heat treatment , picking or equipvalent cold rolling , followed by skin pass to obtain adequate luster surface.
|
With bright and smooth surface ,easy for further grinding to obtain brighter surface ,suitable for medical instruments ,milk
containers ,tableware and so on. |
|
|
BA
|
Bright heat treatment after cold rolling.
|
Structual members .etc.kitchen utensil ,cutlery ,eleltric applicances ,medical instruments ,building decorations ,etc.
|
|
|
NO.3/NO.4
|
Polished with No.150-240 abrasives.
|
Milky food processing equipment , medicalinstruments ,building decorations.
|
|
|
HL
|
Finshed by polishing with abrasives of suitable grain size to obtain continuous streaks.
|
Building decorations ,such as elevators ,escalators ,door etc.
|
|
|
6K/8K
|
A mirror-like reflective surface ,which is obtained by polishing with successively finer abrasives and buffing extensively with all gritlines are removed.
|
Buliding entrances,bulkding column casting ,elevator's wall doors ,counters,sculptures etc.
|
|
| Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
| 201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | ≤ 0.03 | 3.5-5.5 | 16.0-18.0 | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 6.0-8.0 | 16.0-18.0 | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 8.0-13.0 | 18.0-20.0 | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0-13.0 | 18.0-20.0 | - |
| 309S | ≤0.08 | ≤0.75 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0-15.0 | 22.0-24.0 | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 19.0-22.0 | 24.0-26.0 | - |
| 314 | ≤0.25 | ≤1.5-3.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 19.0-22.0 | 23.0-26.0 | |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-15.0 | 16.0-18.0 | 2.0-3.0 |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0-13.0 | 17.0-19.0 | - |
| 347 | ≤0.08 | ≤0.75 | ≤2.0 | ≤0.045 | ≤ 0.03 | 9.0-13.0 | 17.0-19.0 | |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | - | 11.5-13.5 | - |
| 420 | ≤0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.040 | ≤ 0.03 | - | 12.0-14.0 | - |
| 430 | ≤0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤ 0.03 | ≤0.60 | 16.0-18.0 | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 23.0-28.0 | 19.0-23.0 | - |
20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM,27MTS
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM,27MTS
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM,27MTS
Q: What are the details of your after sales service?
A:1) We provide the necessary technical support to all of our customers, such as material performance and heat treatment data advice.
2) We provide the appropriate steel material technical parameters for customers in Germany, The USA, Japan, Britain, and other countries.
Q: How could I get a sample?
A: Before we received the first order, please afford the sample cost and express fee. We will return the sample cost back to you within your first order.
){kind=link}