| Customization: | Available |
|---|---|
| Type: | Steel Plate |
| Standard: | AISI, ASTM, DIN, JIS, GB, BS |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
50CrVA steel belongs to medium carbon alloy spring steel, and the final heat treatment of the steel is quenching and tempering. After heat treatment, this steel has good toughness, high proportion limit and strength limit, high fatigue strength, and similar hardenability to 65S12MnWA, with high hardenability and low overheating sensitivity; When the component is used at a temperature of 300 ºC, its elasticity can still be maintained. The cutting performance of steel is still good, but its plasticity is low during cold deformation and its weldability is poor. Can be used for heavy-duty mold springs. Steel for integral quenching top rod used in plastic molds and die-casting molds.
(2) Supply status and hardness annealed or high-temperature tempered state, hardness ≤ 255HBS.
(3) Chemical composition (mass fraction,%) C 0.47-0 54 Si 0.17~0.37,Mn 0.50~0. 80.
Cr O.80~1. 10,Ni≤0. 30,VO. 10~0. 20.
(4) Referring to the corresponding steel grades, Chinese GB standard steel grade 50CrVA, German DIN standard material grade 1.8159, German DIN standard steel grade 50CrV4/51CrV4, British BS standard steel grade 735A51, French AFNOR standard steel grade 50CV4, French NF standard steel grade 51CrV4/50CV4, International Organization for Standardization ISO standard steel grade 51CrV4, Italian UNI standard steel grade 50CrV4, Belgian NBN standard steel grade 50CrV4, Swedish SS standard steel grade 2230, Spanish UNE standard steel grade 51CrV4, Japanese JIS standard steel grade SUP10, American AISI/SAE/ASTM standard steel grade 6150.
(5) The critical point temperatures (approximate values) are Ac1=752 ºC, Ac3=LL8 ºC, Ar3=746 ºC, Arl=688 ºC, Ms=270 ºC.
(6) Specification for quenching and tempering treatment: quenching temperature 860-880 ºC, oil cooling; Tempering temperature 500 ºC± 10 ºC, cooled with water and oil.
|
Product Name
|
High carbon and alloy 50CrVA 50CrV4 51CrV4 cold rolled Iron strip EN C67S CK67 hardened and tempered spring steel coils 0.2-6.0mm thickness | |||
|
Available Standard
|
ASTM,GB, EN,DIN, JIS
|
|||
|
Thickness
|
1-200mm
|
|||
|
Width
|
1000mm 1500mm 2000mm 2200, customized size is available
|
|||
|
Length
|
2000mm, 3000mm, 6000mm, customized size is available
|
|||
|
|
Cold rolled
|
SPCC, SPCD, SPCE, ST12, ST13, ST14, ST15, ST16, DC01, DC03, DC04, DC05, DC06, CS, DS DDS, Q195, Q235, Q275, A1008
|
||
|
Carbon steel
|
A36, SS330, SS400, SPHC, SPHD, A283, A572, A573, St37, St52, S235JR, S355JR, S355J0, S355J2, Q195, Q235, Q275, #20,#45,#50, 20Mn, 25Mn, 45Mn, 65Mn,Q460, Q550, Q690, Q800, Q890,S25C, S20C, S45C, S50C, 1008, 1020, 1025,1040, 1045,1050, C20, C25, C40, C45,C50
|
|||
|
Boiler Pressure vessel Steel
|
ASTM A204, A285 A302, A387, A515, A516, A537, A612, A737, A738, A841
SB410, SB450, SB480, SPV235, Q245R, Q345R, Q420R, 15CrMo,P245GH, P265GH, P295GH, P355GH,16Mo3,P275NH, P355NH
|
|||
|
Wear-resistant steel
|
NM360, NM400, NM450, NM500, NM550, NM600, AR400,AR450,AR500
Hadox 400, Hadox 450, Hadox500, Xar300, Xar400, Xar450, Xar500
|
|||
|
Weathering Steel
|
Q235NH,Q355NH, Q460NH, ASTM A588, A242, Corten A, Corten B,
SPA-H, SPA-C, S235JoW, S235J2W, S355J0w, S355J2W
|
|||
|
Marine steel
|
ABS, CCS, AH32, DH32, EH32, AH36, DH36, EH36
|
|||
|
Mould Steel
|
H13, 1.2344, SKD61, H11, SKD5, D2,D3, 1.2379, Cr12, Cr12MoV, SKD11
|
|||
|
Alloy structural steel
|
20Cr, 40Cr, 42CrMo, 42CrMo4, 20CrMo, 25CrMo, 30CrMo, 4140, 4130, 5140, 5130, 4340, 8620, 6150, 27SiMn
|
|||
| Pucheng--your reliable steel partner | |||||
| Product | Size | Hardness | Further processing | Application | Product Picture |
| Annealed | T:0.08-4.0MM W:2-400MM |
120-180HV | Severe Bending Shaping Heat Treatment |
springs, washers, Spacers,clips,pin, inserts,shoe,shank, toe,cap, auto components, auto clutches. |
|
| Cold Rolled | T:0.5-4.0MM W:2-400MM | 20-30HRC | Heat Treatment | bandsaw blades scraper |
|
| Hardened & Tempered | T:0.08-4.0MM W:2-400MM |
40-65HRC | change size per unit as request | rolling shutter spring, blades, putty knives, shoe insole, knives,flat spring |
|
| Bimetallica composite |
T:0.08-4.0MM W:2-400MM |
Mix HT HRC |
change size per unit as request |
metal cutting band saw blades |
|
| Materials Grade:CK45.CK50.CK55.CK60.CK65.CK67.CK75.CK80.51CRV4.65MN,SK51.T80,X32.D6A and ect. | |||||
|
N10083-3 Steel Plate Chemical Composition
|
||||||
|
Grade
|
C
|
Si
|
Mn
|
P
|
S
|
Other
|
|
38Cr2
|
0.35-0.42
|
0.4
|
0.50-0.80
|
0.025
|
0.035
|
Cr 0.40-0.60
|
|
46Cr2
|
0.42-0.50
|
0.4
|
0.50-0.80
|
0.025
|
0.035
|
|
|
34Cr4
|
0.30-0.37
|
0.4
|
0.60-0.90
|
0.025
|
0.035
|
Cr 0.90-1.20
|
|
34CrS4
|
0.30-0.37
|
0.4
|
0.60-0.90
|
0.025
|
0.02-0.04
|
|
|
37Cr4
|
0.34-0.41
|
0.4
|
0.60-0.90
|
0.025
|
0.035
|
|
|
37CrS4
|
0.34-0.41
|
0.4
|
0.60-0.90
|
0.025
|
0.02-0.04
|
|
|
41Cr4
|
0.38-0.45
|
0.4
|
0.60-0.90
|
0.025
|
0.035
|
|
|
41CrS4
|
0.38-0.45
|
0.4
|
0.60-0.90
|
0.025
|
0.02-0.04
|
|
|
25CrMo4
|
0.22-0.29
|
0.4
|
0.60-0.90
|
0.025
|
0.035
|
Cr 0.90-1.20
Mo 0.15-0.30 |
|
25CrMoS4
|
0.22-0.29
|
0.4
|
0.60-0.90
|
0.025
|
0.02-0.04
|
|
|
34CrMo4
|
0.30-0.37
|
0.4
|
0.60-0.90
|
0.025
|
0.035
|
|
|
34CrMoS4
|
0.30-0.37
|
0.4
|
0.60-0.90
|
0.025
|
0.02-0.04
|
|
|
42CrMo4
|
0.38-0.45
|
0.4
|
0.60-0.90
|
0.025
|
0.035
|
|
|
42CrMoS4
|
0.38-0.45
|
0.4
|
0.60-0.90
|
0.025
|
0.02-0.04
|
|
|
50CrMo4
|
0.46-0.54
|
0.4
|
0.50-0.80
|
0.025
|
0.035
|
|
|
34CrNiMo6
|
0.30-0.38
|
0.4
|
0.50-0.80
|
0.025
|
0.035
|
Cr 1.3-1.7, Mo 0.15-0.30, Ni 1.3-1.7
|
|
30CrNiMo8
|
0.26-0.34
|
0.4
|
0.50-0.80
|
0.025
|
0.035
|
Cr 1.8-2.2, Mo 0.3-0.5, Ni 1.8-2.2
|
|
35NiCr6
|
0.30-0.37
|
0.4
|
0.60-0.90
|
0.025
|
0.025
|
Cr 0.80-1.10, Ni 1.20-1.60
|
|
36NiCrMo16
|
0.32-0.39
|
0.4
|
0.50-0.80
|
0.025
|
0.025
|
Cr 1.6-2.0, Mo 0.25-0.45, Ni 3.6-4.1
|
|
39NiCrMo3
|
0.35-0.43
|
0.4
|
0.50-0.80
|
0.025
|
0.035
|
Cr 0.6-1.0, Mo 0.15-0.25, Ni 0.7-1.0
|
|
30NiCrMo16-6
|
0.26-0.33
|
0.4
|
0.50-0.80
|
0.025
|
0.025
|
Cr 1.2-1.5, Mo 0.3-0.6, Ni 3.3-4.3
|
|
51CrV4
|
0.47-0.55
|
0.4
|
0.70-1.10
|
0.025
|
0.025
|
Cr 0.9-1.2, V 0.10-0.25
|
|
20MnB5
|
0.17-0.23
|
0.4
|
1.10-1.40
|
0.025
|
0.035
|
B 0.0008-0.0050
|
|
30MnB5
|
0.27-0.33
|
0.4
|
1.15-1.45
|
0.025
|
0.035
|
|
|
38MnB5
|
0.36-0.42
|
0.4
|
1.15-1.45
|
0.025
|
0.035
|
|
|
27MnCrB5-2
|
0.24-0.30
|
0.4
|
1.10-1.40
|
0.025
|
0.035
|
Cr 0.30-0.60,
B 0.0008-0.0050 |
|
33MnCrB5-2
|
0.30-0.36
|
0.4
|
1.20-1.50
|
0.025
|
0.035
|
|
|
39MnCrB6-2
|
0.36-0.42
|
0.4
|
1.40-1.70
|
0.025
|
0.035
|
|
|
EN10083-3 Steel Plate Yield Strength Min. (Mpa)
|
||||||
|
Grade
|
Number
|
t≤8mm
|
8-20mm
|
20-60mm
|
60-100mm
|
100-160mm
|
|
38Cr2
|
1.7003
|
550
|
450
|
350
|
|
|
|
46Cr2
|
1.7006
|
650
|
550
|
400
|
|
|
|
34Cr4
|
1.7033
|
700
|
590
|
460
|
|
|
|
34CrS4
|
1.7037
|
700
|
590
|
460
|
|
|
|
37Cr4
|
1.7034
|
750
|
630
|
510
|
|
|
|
37CrS4
|
1.7038
|
750
|
630
|
510
|
|
|
|
41Cr4
|
1.7035
|
800
|
660
|
560
|
|
|
|
41CrS4
|
1.7039
|
800
|
660
|
560
|
|
|
|
25CrMo4
|
1.7218
|
700
|
600
|
450
|
400
|
|
|
25CrMoS4
|
1.7213
|
700
|
600
|
450
|
400
|
|
|
34CrMo4
|
1.7220
|
800
|
650
|
550
|
500
|
450
|
|
34CrMoS4
|
1.7226
|
800
|
650
|
550
|
500
|
450
|
|
42CrMo4
|
1.7225
|
900
|
750
|
650
|
550
|
500
|
|
42CrMoS4
|
1.7227
|
900
|
750
|
650
|
550
|
500
|
|
50CrMo4
|
1.7228
|
900
|
780
|
700
|
650
|
550
|
|
34CrNiMo6
|
1.6582
|
1000
|
900
|
800
|
700
|
600
|
|
30CrNiMo8
|
1.6580
|
1050
|
1050
|
900
|
800
|
700
|
|
35NiCr6
|
1.5815
|
740
|
740
|
640
|
|
|
|
36NiCrMo16
|
1.6773
|
1050
|
1050
|
900
|
800
|
800
|
|
39NiCrMo3
|
1.6510
|
785
|
735
|
685
|
635
|
540
|
|
30NiCrMo16-6
|
1.6747
|
880
|
880
|
880
|
790
|
880
|
|
51CrV4
|
1.8159
|
900
|
800
|
700
|
650
|
600
|
|
20MnB5
|
1.5530
|
700
|
600
|
|
|
|
|
30MnB5
|
1.5531
|
800
|
650
|
|
|
|
|
38MnB5
|
1.5532
|
900
|
700
|
|
|
|
|
27MnCrB5-2
|
1.7182
|
800
|
750
|
700
|
|
|
|
33MnCrB5-2
|
1.7185
|
850
|
800
|
750
|
|
|
|
39MnCrB6-2
|
1.7189
|
900
|
850
|
800
|
|
|
|
EN10083-3 Steel Plate Tensile Strength (Mpa)
|
|||||
|
Grade
|
t≤8mm
|
8-20mm
|
20-60mm
|
60-100mm
|
100-160mm
|
|
38Cr2
|
800-950
|
700-850
|
600-750
|
|
|
|
46Cr2
|
900-1100
|
800-950
|
650-800
|
|
|
|
34Cr4
|
900-1100
|
800-950
|
700-850
|
|
|
|
34CrS4
|
900-1100
|
800-950
|
700-850
|
|
|
|
37Cr4
|
950-1150
|
850-1000
|
750-900
|
|
|
|
37CrS4
|
950-1150
|
850-1000
|
750-900
|
|
|
|
41Cr4
|
1000-1200
|
900-1100
|
800-950
|
|
|
|
41CrS4
|
1000-1200
|
900-1100
|
800-950
|
|
|
|
25CrMo4
|
900-1100
|
800-950
|
700-850
|
650-800
|
|
|
25CrMoS4
|
900-1100
|
800-950
|
700-850
|
650-800
|
|
|
34CrMo4
|
1000-1200
|
900-1100
|
800-950
|
750-900
|
700-850
|
|
34CrMoS4
|
1000-1200
|
900-1100
|
800-950
|
750-900
|
700-850
|
|
42CrMo4
|
1100-1300
|
1000-1200
|
900-1100
|
800-950
|
750-900
|
|
42CrMoS4
|
1100-1300
|
1000-1200
|
900-1100
|
800-950
|
750-900
|
|
50CrMo4
|
1100-1300
|
1000-1200
|
900-1100
|
850-1000
|
800-950
|
|
34CrNiMo6
|
1200-1400
|
1100-1300
|
1000-1200
|
900-1100
|
800-950
|
|
30CrNiMo8
|
1250-1450
|
1250-1450
|
1000-1300
|
1000-1200
|
900-1100
|
|
35NiCr6
|
880-1080
|
880-1080
|
780-980
|
|
|
|
36NiCrMo16
|
1250-1450
|
1250-1450
|
1100-1300
|
1000-1200
|
1000-1200
|
|
39NiCrMo3
|
980-1180
|
930-1130
|
880-1080
|
830-980
|
740-880
|
|
30NiCrMo16-6
|
1080-1230
|
1080-1230
|
1080-1230
|
900-1050
|
900-1050
|
|
51CrV4
|
1100-1300
|
1000-1200
|
900-1100
|
850-1000
|
800-950
|
|
20MnB5
|
900-1050
|
750-900
|
|
|
|
|
30MnB5
|
950-1150
|
800-950
|
|
|
|
|
38MnB5
|
1050-1250
|
850-1050
|
|
|
|
|
27MnCrB5-2
|
1000-1250
|
900-1150
|
800-1000
|
|
|
|
33MnCrB5-2
|
1050-1300
|
950-1200
|
900-1100
|
|
|
|
39MnCrB6-2
|
1100-1350
|
1050-1250
|
1000-1200
|
|
|
|
Standard
|
Alloy Steel Grades
|
|||
|
EN10083-3
|
38Cr2
|
41CrS4
|
50CrMo4
|
51CrV4
|
|
46Cr2
|
25CrMo4
|
30CrNiMo8
|
20MnB5
|
|
|
34Cr4
|
25CrMoS4
|
34CrNiMo6
|
30MnB5
|
|
|
34CrS4
|
34CrMo4
|
35NiCr6
|
38MnB5
|
|
|
37Cr4
|
34CrMoS4
|
36NiCrMo16
|
27MnCrB5-2
|
|
|
37CrS4
|
42CrMo4
|
39NiCrMo3
|
33MnCrB5-2
|
|
|
41Cr4
|
42CrMoS4
|
30NiCrMo16-6
|
39MnCrB6-2
|
|
|
JIS G4053
|
SCM415
|
SCM420
|
SCM425
|
SCM430
|
|
SCM435
|
SCM440
|
SCM445
|
|
|
|
AISI/SAE
|
4120
|
4130
|
4135
|
4140
|
|
4145
|
4150
|
4320
|
4340
|
|
|
GB
|
20Mn2
|
20MnVB
|
12CrMoV
|
20CrNi
|
|
30Mn2
|
40MnVB
|
35CrMoV
|
40CrNi
|
|
|
35Mn2
|
20MnTiB
|
12Cr1MoV
|
45CrNi
|
|
|
40Mn2
|
25MnTiBRE
|
25Cr2MoVA
|
50CrNi
|
|
|
45Mn2
|
15Cr
|
25Cr2Mo1VA
|
12CrNi2
|
|
|
50Mn2
|
15CrA
|
38CrMoAl
|
12CrNi3
|
|
|
20MnV
|
20Cr
|
40CrV
|
20CrNi3
|
|
|
27SiMn
|
30Cr
|
50CrVA
|
30CrNi3
|
|
|
35SiMn
|
35Cr
|
15CrMn
|
37CrNi3
|
|
|
42SiMn
|
40Cr
|
20CrMn
|
12Cr2Ni4
|
|
|
20SiMn2MoV
|
45Cr
|
40CrMn
|
20Cr2Ni4
|
|
|
25SiMn2MoV
|
50Cr
|
20CrMnSi
|
20CrNiMo
|
|
|
37SiMn2MoV
|
38CrSi
|
25CrMnSi
|
40CrNiMoA
|
|
|
40B
|
12CrMo
|
30CrMnSi
|
18CrNiMnMoA
|
|
|
45B
|
15CrMo
|
30CrMnSiA
|
45CrNiMoVA
|
|
|
50B
|
20CrMo
|
35CrMnSiA
|
18Cr2Ni4WA
|
|
|
40MnB
|
30CrMo
|
20CrMnMo
|
25Cr2Ni4WA
|
|
|
45MnB
|
30CrMoA
|
40CrMnMo
|
|
|
|
20MnMoB
|
35CrMo
|
20CrMnTi
|
|
|
|
15MnVB
|
42CrMo
|
30CrMnTi
|
|
|
|
ASME SA514
ASTM A514 |
A514 Grade A
|
A514 Grade B
|
A514 Grade E
|
A514 Grade F
|
|
A514 Grade H
|
A514 Grade P
|
A514 Grade Q
|
A514 Grade S
|
|
Q: ARE YOU FACTORY OR TRADER?
A: Our company is a cold rolling manufacturer of magnetic stainless steel coil since 2016. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A: Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel Sheets.
Q: HOW TO GET A SAMPLE?
A: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q: HOW TO VISIT YOUR FACTORY?
A: Most of the main cities have flights to Wuxi; you can take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day 1 flight around noon time).
){kind=link}